This file is maintained by Jaroslav Kysela .
Note: OPL -> Raw (native) OPL
Note: MIDI -> external MIDI port
Note: EMUL -> MIDI emulation
Note: SYNTH -> yeah, well ?
Note: SYNTH_MIDI -> internal synth that handles MIDI data
Note: SEQ -> kernel client for ALSA sequencer
Note: HWDEP -> various hardware-dependent interfaces/devices
=====
ID: Turtle Beach WaveFront
SC: Tropez Plus (Tropez+)
SC: Tropez
SC: Maui (models with CS4232; others use OPTi 16 which is not handled)
IF: MIXER,PCM,MIDI,OPL,SYNTH_MIDI,HWDEP
CO: pbd@op.net
MA: pbd@op.net
ID: C-Media CMI8330
IF: MIXER,PCM
MA: George Talusan
alias char-major-14 snd
alias snd-minor-oss-0 snd-interwave
alias snd-minor-oss-3 snd-pcm1-oss
alias snd-minor-oss-4 snd-pcm1-oss
alias snd-minor-oss-5 snd-pcm1-oss
alias snd-minor-oss-12 snd-pcm1-oss
alias snd-card-0 snd-interwave
options snd snd_major=14 snd_cards_limit=1
options snd-interwave snd_index=1 snd_id="guspnp" snd_port=0x220 snd_irq=5
snd_dma1=5 snd_dma2=6
Linux可以有两种方式支持网卡,一种是在内核中直接支持,另一种是加载模块支持。在linux启动的过程
中,查看是否有这样类似的一行:
Eth0: NE2000 Card found at 0x300 using IRQ 05
如果有,那么您的网卡已经被Linux识别了,然后使用netconfig程序就可以完成网络设置工作(IP地址、
网关、网络掩码等)。如果没有发现这一行,但是知道网卡与某一类型网卡兼容,也可以使用模块驱动这块网卡,
方法是:修改/etc/rc.d/rc.modules文件,加入这样一行:
Code maturity level opetions
y Prompt for development and/or incomplete codes/drivers
Console drivers
y Video mode selection support
...
y Support for frame buffer devices
...
y VESA VGA graphics console
...
y Advance low level driver options
...
y 8 bpp packed pixels support
y 16 bpp packed pixels support
y 24 bpp packed pixels support
编译安装内核:
以 root身份登录,键入以下命令:
# cd /usr/src/linux
# make bzImage
# make modules
# make modules_install
在 /usr/X11R6/bin和 /etc/X11里都有一个文件名为 X 的文件,它其实是一个类似Windows的快捷方式的东西,它
指向一个实际的 X Server文件,如XF86_VGA16。startx 脚本调用 X 启动 Server而不管具体是哪个 Server。因此,
一定要把上面两个目录中的 X 都指向 XF86_FBDev,不同版本可能调用其中任意一个。