Board logo

标题: Linux下C语言编程--文件的操作[ZT] [打印本页]

作者: 网普科技     时间: 2005-10-31 08:21 PM    标题: Linux下C语言编程--文件的操作[ZT]

1.文件的创建和读写
2.文件的各个属性
3.目录文件的操作
4.管道文件

1。文件的创建和读写
    我假设你已经知道了标准级的文件操作的各个函数(fopen,fread,fwrite等等).当然如果你不清楚的话也不要着急.我们讨论的系统级的文件操作实际上是为标准级文件操作服务的.
当我们需要打开一个文件进行读写操作的时候,我们可以使用系统调用函数open.使用完成以后我们调用另外一个close函数进行关闭操作.
#include
#include
#include
#include

int open(const char *pathname,int flags);
int open(const char *pathname,int flags,mode_t mode);

int close(int fd);

open函数有两个形式.其中pathname是我们要打开的文件名(包含路径名称,缺省是认为在当前路径下面).flags可以去下面的一个值或者是几个值的组合.
O_RDONLY:以只读的方式打开文件.
O_WRONLY:以只写的方式打开文件.
O_RDWR:以读写的方式打开文件.
O_APPEND:以追加的方式打开文件.
O_CREAT:创建一个文件.
O_EXEC:如果使用了O_CREAT而且文件已经存在,就会发生一个错误.
O_NOBLOCK:以非阻塞的方式打开一个文件.
O_TRUNC:如果文件已经存在,则删除文件的内容.
前面三个标志只能使用任意的一个.如果使用了O_CREATE标志,那么我们要使用open的第二种形式.还要指定mode标志,用来表示文件的访问权限.mode可以是以下情况的组合.
-----------------------------------------------------------------
S_IRUSR 用户可以读 S_IWUSR 用户可以写
S_IXUSR 用户可以执行 S_IRWXU 用户可以读写执行
-----------------------------------------------------------------
S_IRGRP 组可以读 S_IWGRP 组可以写
S_IXGRP 组可以执行 S_IRWXG 组可以读写执行
-----------------------------------------------------------------
S_IROTH         其他人可以读    S_IWOTH         其他人可以写
S_IXOTH         其他人可以执行  S_IRWXO         其他人可以读写执行
-----------------------------------------------------------------
S_ISUID 设置用户执行ID  S_ISGID 设置组的执行ID
-----------------------------------------------------------------
我们也可以用数字来代表各个位的标志.Linux总共用5个数字来表示文件的各种权限.
00000.第一位表示设置用户ID.第二位表示设置组ID,第三位表示用户自己的权限位,第四位表示组的权限,最后一位表示其他人的权限.
每个数字可以取1(执行权限),2(写权限),4(读权限),0(什么也没有)或者是这几个值的和.
比如我们要创建一个用户读写执行,组没有权限,其他人读执行的文件.设置用户ID位那么我们可以使用的模式是--1(设置用户ID)0(组没有设置)7(1+2+4)0(没有权限,使用缺省)5(1+4)即10705:
open("temp",O_CREAT,10705);
如果我们打开文件成功,open会返回一个文件描述符.我们以后对文件的所有操作就可以对这个文件描述符进行操作了.
当我们操作完成以后,我们要关闭文件了,只要调用close就可以了,其中fd是我们要关闭的文件描述符.
文件打开了以后,我们就要对文件进行读写了.我们可以调用函数read和write进行文件的读写.
#include

ssize_t  read(int fd, void *buffer,size_t count);
ssize_t write(int fd, const void *buffer,size_t count);

fd是我们要进行读写操作的文件描述符,buffer是我们要写入文件内容或读出文件内容的内存地址.count是我们要读写的字节数.
对于普通的文件read从指定的文件(fd)中读取count字节到buffer缓冲区中(记住我们必须提供一个足够大的缓冲区),同时返回count.
如果read读到了文件的结尾或者被一个信号所中断,返回值会小于count.如果是由信号中断引起返回,而且没有返回数据,read会返回-1,且设置errno为EINTR.当程序读到了文件结尾的时候,read会返回0.
write从buffer中写count字节到文件fd中,成功时返回实际所写的字节数.
下面我们学习一个实例,这个实例用来拷贝文件.

#include
#include
#include
#include
#include
#include
#include

#define BUFFER_SIZE 1024

int main(int argc,char **argv)
{

int from_fd,to_fd;
int bytes_read,bytes_write;
char buffer[BUFFER_SIZE];
char *ptr;

if(argc!=3)
  {
fprintf(stderr,"Usage:%s fromfile tofile\n\a",argv[0]);
exit(1);
  }

/* 打开源文件 */

if((from_fd=open(argv[1],O_RDONLY))==-1)
  {
fprintf(stderr,"Open %s Error:%s\n",argv[1],strerror(errno));
exit(1);
}

/* 创建目的文件 */

if((to_fd=open(argv[2],O_WRONLY|O_CREAT,S_IRUSR|S_IWUSR))==-1)
  {
        fprintf(stderr,"Open %s Error:%s\n",argv[2],strerror(errno));
        exit(1);
}

/* 以下代码是一个经典的拷贝文件的代码 */

while(bytes_read=read(from_fd,buffer,BUFFER_SIZE))
{
/* 一个致命的错误发生了 */
   if((bytes_read==-1)&&(errno!=EINTR)) break;
   else if(bytes_read>0)
       {
  ptr=buffer;
  while(bytes_write=write(to_fd,ptr,bytes_read))
   {
/* 一个致命错误发生了 */
     if((bytes_write==-1)&&(errno!=EINTR))break;
/* 写完了所有读的字节 */
     else if(bytes_write==bytes_read) break;
/* 只写了一部分,继续写 */
     else if(bytes_write>0)
           {
      ptr+=bytes_write;
   bytes_read-=bytes_write;
          }
          }
/* 写的时候发生的致命错误 */
         if(bytes_write==-1)break;

       }
  }
close(from_fd);
close(to_fd);
exit(0);
}

2。文件的各个属性
    文件具有各种各样的属性,除了我们上面所知道的文件权限以外,文件还有创建时间,大小等等属性.
有时侯我们要判断文件是否可以进行某种操作(读,写等等).这个时候我们可以使用access函数.
#include

int access(const char *pathname,int mode);

pathname:是文件名称,mode是我们要判断的属性.可以取以下值或者是他们的组合.
R_OK文件可以读,W_OK文件可以写,X_OK文件可以执行,F_OK文件存在.当我们测试成功时,函数返回0,否则如果有一个条件不符时,返回-1.
如果我们要获得文件的其他属性,我们可以使用函数stat或者fstat.
#include
#include

int stat(const char *file_name,struct stat *buf);
int fstat(int filedes,struct stat *buf);

struct stat {
dev_t st_dev; /* 设备   */
ino_t st_ino; /* 节点   */
mode_t st_mode; /* 模式   */
nlink_t st_nlink; /* 硬连接 */
uid_t st_uid; /* 用户ID */
gid_t st_gid; /* 组ID   */
dev_t st_rdev; /* 设备类型 */
off_t st_off; /* 文件字节数 */
unsigned long  st_blksize; /* 块大小 */
unsigned long st_blocks; /* 块数   */
time_t st_atime; /* 最后一次访问时间 */
time_t st_mtime; /* 最后一次修改时间 */
time_t st_ctime; /* 最后一次改变时间(指属性) */
};

stat用来判断没有打开的文件,而fstat用来判断打开的文件.我们使用最多的属性是st_mode.通过着属性我们可以判断给定的文件是一个普通文件还是一个目录,连接等等.可以使用下面几个宏来判断.
S_ISLNK (st_mode):是否是一个连接.S_ISREG是否是一个常规文件.S_ISDIR是否是一个目录S_ISCHR是否是一个字符设备. S_ISBLK是否是一个块设备S_ISFIFO是否 是一个FIFO文件.S_ISSOCK是否是一个SOCKET文件. 我们会在下面说明如何使用这几个宏的.
3。目录文件的操作
    在我们编写程序的时候,有时候会要得到我们当前的工作路径。C库函数提供了getcwd来解决这个问题。
#include

char *getcwd(char *buffer,size_t size);

我们提供一个size大小的buffer,getcwd会把我们当前的路径考到buffer中.如果buffer太小,函数会返回-1和一个错误号.
Linux提供了大量的目录操作函数,我们学习几个比较简单和常用的函数.
#include
#include
#include
#include
#include

int mkdir(const char *path,mode_t mode);
DIR *opendir(const char *path);
struct dirent *readdir(DIR *dir);
void rewinddir(DIR *dir);
off_t telldir(DIR *dir);
void  seekdir(DIR *dir,off_t off);
int closedir(DIR *dir);

struct dirent {
long  d_ino;
off_t  d_off;
unsigned short d_reclen;
char  d_name[NAME_MAX+1]; /* 文件名称 */

mkdir 很容易就是我们创建一个目录,opendir打开一个目录为以后读做准备.readdir读一个打开的目录.rewinddir是用来重读目录的和我们学的rewind函数一样.closedir是关闭一个目录.telldir和seekdir类似与ftee和fseek函数.
下面我们开发一个小程序,这个程序有一个参数.如果这个参数是一个文件名,我们输出这个文件的大小和最后修改的时间,如果是一个目录我们输出这个目录下所有文件的大小和修改时间.

#include
#include
#include
#include
#include
#include
#include

static int get_file_size_time(const char *filename)
{
struct stat statbuf;

if(stat(filename,&statbuf)==-1)
  {
printf("Get stat on %s Error:%s\n",
filename,strerror(errno));
return(-1);
  }
  
if(S_ISDIR(statbuf.st_mode))return(1);
if(S_ISREG(statbuf.st_mode))
printf("%s size:%ld bytes\tmodified at %s",
filename,statbuf.st_size,ctime(&statbuf.st_mtime));

return(0);
}

int main(int argc,char **argv)
{
DIR *dirp;
struct dirent *direntp;
int stats;

if(argc!=2)
  {
printf("Usage:%s filename\n\a",argv[0]);
exit(1);
  }

if(((stats=get_file_size_time(argv[1]))==0)||(stats==-1))exit(1);

if((dirp=opendir(argv[1]))==NULL)
{
printf("Open Directory %s Error:%s\n",
argv[1],strerror(errno));
exit(1);
}

while((direntp=readdir(dirp))!=NULL)
   if(get_file_size_time(direntp-
closedir(dirp);
exit(1);
}

4。管道文件
    Linux提供了许多的过滤和重定向程序,比如more cat
等等.还提供了< > | <<等等重定向操作符.在这些过滤和重 定向程序当中,都用到了管道这种特殊的文件.系统调用pipe可以创建一个管道.
#include

int pipe(int fildes[2]);

pipe调用可以创建一个管道(通信缓冲区).当调用成功时,我们可以访问文件描述符fildes[0],fildes[1].其中fildes[0]是用来读的文件描述符,而fildes[1]是用来写的文件描述符.
在实际使用中我们是通过创建一个子进程,然后一个进程写,一个进程读来使用的.
关于进程通信的详细情况请查看进程通信

#include
#include
#include
#include
#include
#include
#include
#define  BUFFER 255

int main(int argc,char **argv)
{
  char buffer[BUFFER+1];
  int fd[2];

  if(argc!=2)
  {
fprintf(stderr,"Usage:%s string\n\a",argv[0]);
exit(1);
  }

  if(pipe(fd)!=0)
  {
fprintf(stderr,"Pipe Error:%s\n\a",strerror(errno));
exit(1);
  }
  if(fork()==0)
   {
close(fd[0]);
printf("Child[%d] Write to pipe\n\a",getpid());
snprintf(buffer,BUFFER,"%s",argv[1]);
write(fd[1],buffer,strlen(buffer));
printf("Child[%d] Quit\n\a",getpid());
exit(0);
   }
else
  {
close(fd[1]);
printf("Parent[%d] Read from pipe\n\a",getpid());
memset(buffer,'\0',BUFFER+1);
read(fd[0],buffer,BUFFER);
printf("Parent[%d] Read:%s\n",getpid(),buffer);
   exit(1);
  }
}

为了实现重定向操作,我们需要调用另外一个函数dup2.
#include

int dup2(int oldfd,int newfd);

dup2将用oldfd文件描述符来代替newfd文件描述符,同时关闭newfd文件描述符.也就是说,
所有向newfd操作都转到oldfd上面.下面我们学习一个例子,这个例子将标准输出重定向到一个文件.

#include
#include
#include
#include
#include
#include
#include

#define  BUFFER_SIZE 1024

int main(int argc,char **argv)
{
int fd;
char buffer[BUFFER_SIZE];

if(argc!=2)
  {
fprintf(stderr,"Usage:%s outfilename\n\a",argv[0]);
exit(1);
  }

if((fd=open(argv[1],O_WRONLY|O_CREAT|O_TRUNC,S_IRUSR|S_IWUSR))==-1)
  {
  fprintf(stderr,"Open %s Error:%s\n\a",argv[1],strerror(errno));
exit(1);
  }

if(dup2(fd,STDOUT_FILENO)==-1)
  {
fprintf(stderr,"Redirect Standard Out Error:%s\n\a",strerror(errno));
exit(1);
  }

fprintf(stderr,"Now,please input string");
fprintf(stderr,"(To quit use CTRL+D)\n");  
while(1)
  {
    fgets(buffer,BUFFER_SIZE,stdin);
    if(feof(stdin))break;
    write(STDOUT_FILENO,buffer,strlen(buffer));
}
exit(0);
}

好了,文件一章我们就暂时先讨论到这里,学习好了文件的操作我们其实已经可以写出一些比较有用的程序了.我们可以编写一个实现例如dir,mkdir,cp,mv等等常用的文件操作命令了.
想不想自己写几个试一试呢?




欢迎光临 网普技术论坛 (http://bbs.netpu.net/) Powered by Discuz! 2.5